OTHER

Carriage House™

Pre-Consumer Recycled Materials Post-Consumer Recycled Materials

Field Tile

CANVAS CH75
Field Tile
Pre-Consumer: 19.9%
Post-Consumer: 17.6%
Manufacturing Plant: Monterrey, MX
STRAW CH76
Field Tile
Pre-Consumer: 19.9%
Post-Consumer: 17.6%
Manufacturing Plant: Monterrey, MX
SADDLE CH77
Field Tile
Pre-Consumer: 19.9%
Post-Consumer: 17.6%
Manufacturing Plant: Monterrey, MX
BUCKSKIN CH79
Field Tile
Pre-Consumer: 19.9%
Post-Consumer: 17.6%
Manufacturing Plant: Monterrey, MX

Decorative Floor Tile

UNIVERSAL STONE ACCENT
4 X 12 CH80

Decorative Floor Tile
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Manufacturing Plant: Imported, > 500 mi.
UNIVERSAL STONE ACCENT CORNER
4 X 4 CH80

Decorative Floor Tile
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Manufacturing Plant: Imported, > 500 mi.
 

Description

Functional and elegant, Carriage House summons its earthen beauty through four exquisite colors and its rustic, stone look. Available in a wide array of sizes, its look is at once subtle and dramatic. Gently honed edges combine with stone-like markings to create a tile that's at home in almost any setting. A variety of accents are also available that can be mixed or matched with the field tile colors. One look and you'll see how Carriage House's natural beauty lies in its versatility.
 

NOTES:

  • 2" x 2" inserts coordinate with 8" x 10" wall diamond cut-out accents, which are sold without inserts.

Product Information

TILE THICKNESS: 5/16"
MINIMUM GROUT JOINT RECOMMENDATION: 3/16"
  RELATIVE PRICING: Low
  SHADE VARIATION: Medium (V2) Medium (V2)

Performance Characteristics

  D.C.O.F. Moisture Breaking   Chemical Abrasion
Wet Absorption Strength MOH's Resistance Resistance
Floor  > 0.42 <3.0%  =250 lbs. 8.0 Resistant 4
 Wall  < 0.42 <20.0%  120-230 lbs. 4.0-6.5 Resistant N/A

Dynamic C.O.F. (Wet) value as measured by the DCOF AcuTestTM helps to assess a products suitability for a commercial environment. Read information on D.C.O.F.

Manufacturers Warning:

  • These tiles have a dynamic coefficient of friction less than 0.42 as measured by the DCOF AcutestTM method. Tiles with DCOF Acutest values less than .42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/section6.2.2.1.10.html.
  • Water, oil, grease, etc. create slippery conditions. Floor applicatons with exposure to these conditions require extra caution in product selection. Not for use on ramps.
  • For addtional information, refer to Factors to Consider.
  • Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.

Applications

INTERIOR   EXTERIOR
  RES LT COM COM   RES COM
Floors/Patios (Covered & Uncovered)  
Walls/Backsplashes  
Countertops  
Pool Linings  
Pool Decking  

NOTES:

  • Suitable for exterior applications in non-freezing climates when proper installation methods are followed.
  • Wall accents suitable for wall use only.
  • Wall field tile suitable for residential bathroom floors only, not subject to outdoor foot traffic.
  • Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection.

Downloads

Tile Size

 Size     Shape
 4 x 4 Universal Stone Accent Corner
(3 15/16" x 3 15/16")
(10.0 cm x 10.0 cm)
Pieces per carton: 12  
  4" x 4" Universal Stone Accent Corner
 4 x 12 Universal Stone Accent
(3 15/16" x 11 15/16")
(10.0 cm x 30.3 cm)
Pieces per carton: 18  
  4" x 12" Universal Stone Accent
 12 x 12 Field Tile
(11 13/16" x 11 13/16")
(30.0 cm x 30.0 cm)
Pieces per carton: 11
SQFT: 11  
  12" x 12" Field Tile
 18 x 18 Field Tile
(17 7/8" x 17 7/8")
(45.4 cm x 45.4 cm)
Pieces per carton: 8
SQFT: 18  
  18" x 18" Field Tile

Trim

 Description   Shape Number Size Shape
 Bullnose   P-43C9 3 x 12 Bullnose P-43C9 - 3" x 12"
 Bullnose   S-4389 3 x 8 Bullnose S-4389 - 3" x 8"
 Counter Rail   26-CRW 2 x 6 Counter Rail 26-CRW - 2" x 6"
 Counter Rail Corner   22-CRN 2 x 2 Counter Rail Corner 22-CRN - 2" x 2"
 Quarter Round   A-106 1 x 6 Quarter Round A-106 - 1" x 6"
 Quarter Round Outcorner   UC-106 1 x 1 Quarter Round Outcorner UC-106 - 1" x 1"
 Radius Bullnose   A-4200 2 x 6 Radius Bullnose A-4200 - 2" x 6"
 Radius Bullnose Outcorner   AN-4200 2 x 2 Radius Bullnose Outcorner AN-4200 - 2" x 2"
 Surface Bullnose   S-4669 6 x 6 Surface Bullnose S-4669 - 6" x 6"
 Surface Bullnose Outcorner   SCRL-4669 6 x 6 Surface Bullnose Outcorner SCRL-4669 - 6" x 6"
 Surface Bullnose Outcorner   SN-4389 3 x 3 Surface Bullnose Outcorner SN-4389 - 3" x 3"

NOTES:

  • Floor Bullnose trim is intended to coordinate with floor field tile in the standard 90-degree installation position.