CERAMIC

Ash Creek™

Pre-Consumer Recycled Materials Post-Consumer Recycled Materials

Field Tile

ALMOND AS01
Field Tile
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Origin: Turkey
WALNUT AS02
Field Tile
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Origin:

Wall Field Tile

ALMOND AS01
Wall Field Tile
Pre-Consumer: 32.5%
Post-Consumer: 1.5%
Manufacturing Plant: Monterrey, MX
WALNUT AS02
Wall Field Tile
Pre-Consumer: 32.5%
Post-Consumer: 1.5%
Manufacturing Plant: Monterrey, MX

Decorative Floor Tile

ALMOND FLOOR BORDER 3 X 12 AS01
Decorative Floor Tile
Pre-Consumer: 32.5%
Post-Consumer: 1.5%
Manufacturing Plant: Monterrey, MX
WALNUT FLOOR BORDER 3 X 12 AS02
Decorative Floor Tile
Pre-Consumer: 32.5%
Post-Consumer: 1.5%
Manufacturing Plant: Monterrey, MX

Decorative Wall Tile

ALMOND WALL ACCENT CUTOUT
9 X 12 * AS01

Decorative Wall Tile
Pre-Consumer: 32.5%
Post-Consumer: 1.5%
Manufacturing Plant: Monterrey, MX
WALNUT WALL ACCENT CUTOUT
9 X 12 AS02

Decorative Wall Tile
Pre-Consumer: 32.5%
Post-Consumer: 1.5%
Manufacturing Plant: Monterrey, MX

Accent Tiles

ALMOND FLORA WALL ACCENT /INSERT 3 X 3 * AS01
Accent Tiles
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Origin: China
WALNUT FLORA WALL ACCENT /INSERT 3 X 3 * AS02
Accent Tiles
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Origin: China
ALMOND FLORA WALL
ACCENT 4 X 9 AS01

Accent Tiles
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Origin: China
WALNUT FLORA WALL
ACCENT 4 X 9 AS02

Accent Tiles
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Origin: China
 

Description

Rustic Stone Look. Variety of accent options for both floor and wall. Coordinating floor and wall tile. Floor tile has lightly chiseled edges.
 

NOTES:

  • * 3" x 3' Inserts coordinate with 9" x 12" cutout wall accents, which are sold without inserts.

Product Information

TILE THICKNESS: 5/16"
MINIMUM GROUT JOINT RECOMMENDATION: 3/16" floor, 1/16" wall
  RELATIVE PRICING: Low
  SHADE VARIATION: High (V3) High (V3)

Performance Characteristics

  D.C.O.F. Moisture Breaking   Chemical Abrasion
Wet Absorption Strength MOH's Resistance Resistance
Floor  > 0.42 <3.5%  =250lbs. 8.0 Resistant 4
 Wall  < 0.42 <20.0%  >120-230 lbs. 4.0-6.5 Resistant 4

Dynamic C.O.F. (Wet) value as measured by the DCOF AcuTestTM helps to assess a products suitability for a commercial environment. Read information on D.C.O.F.

Manufacturers Warning:

  • These tiles have a dynamic coefficient of friction less than 0.42 as measured by the DCOF AcutestTM method. Tiles with DCOF Acutest values less than .42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/section6.2.2.1.10.html.
  • Water, oil, grease, etc. create slippery conditions. Floor applicatons with exposure to these conditions require extra caution in product selection. Not for use on ramps.
  • For addtional information, refer to Factors to Consider.
  • Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.

Applications

INTERIOR   EXTERIOR
  RES LT COM COM   RES COM
Floors/Patios (Covered & Uncovered)  
Walls/Backsplashes  
Countertops  
Pool Linings  
Pool Decking  

NOTES:

  • Suitable for exterior applications in non-freezing climates when proper installation methods are followed.
  • Wall Field Tile suitable for residential bathroom floors that are not subject to outside foot traffic. Wall accents suitable for wall use only.
  • Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection.

Downloads

Tile Size

 Size     Shape
 3 x 3 Wall Accent/Insert
(2 15/16" x 2 15/16")
(7.5 cm x 7.5 cm)
Pieces per carton: 60  
  3" x 3" Wall Accent/Insert
 3 x 12 Floor Accent
(2 15/16" x 11 7/8")
(7.5 cm x 30.2 cm)
Pieces per carton: 10  
  3" x 12" Floor Accent
 4 x 9 Wall Accent
(3 7/8" x 8 7/8")
(9.8 cm x 22.5 cm)
Pieces per carton: 20  
  4" x 9" Wall Accent
 6 x 6 Wall Tile
(6" x 6")
(15.2 cm x 15.2 cm)
Pieces per carton: 50
SQFT: 12.50  
  6" x 6" Wall Tile
 9 x 12 Wall Tile
(8 15/16" x 11 13/16")
(22.7 cm x 30.3 cm)
Pieces per carton: 15
SQFT: 11.25  
  9" x 12" Wall Tile
 12 x 12 Field Tile
(11 13/16" x 11 13/16")
(30.0 cm x 30.0 cm)
Pieces per carton: 11
SQFT: 11  
  12" x 12" Field Tile
 18 x 18 Field Tile
(17 3/4" x 17 3/4")
(45.2 cm x 45.2 cm)
Pieces per carton: 8
SQFT: 18  
  18" x 18" Field Tile

Trim

 Description   Shape Number Size Shape
 Bullnose   P-43C9 3 x 12 Bullnose P-43C9 - 3" x 12"
 Counter Rail Corner   22-CRCN 2 x 2 Counter Rail Corner 22-CRCN - 2" x 2"
 Counter Rail   26-CRWL 2 x 6 Counter Rail 26-CRWL - 2" x 6"
 Quarter Round   A-106 1 x 6 Quarter Round A-106 - 1" x 6"
 Quarter Round Corner   UC-106 1 x 1 Quarter Round Corner UC-106 - 1" x 1"
 Radius Bullnose   A-4200 2 x 6 Radius Bullnose A-4200 - 2" x 6"
 Radius Bullnose Outcorner   AN-4200 2 x 2 Radius Bullnose Outcorner AN-4200 - 2" x 2"
 Surface Bullnose   S-4269 2 x 6 Surface Bullnose S-4269 - 2" x 6"
 Surface Bullnose   S-4309 3 x 9 Surface Bullnose S-4309 - 3" x 9"
 Surface Bullnose Outcorner   SN-4269 2 x 2 Surface Bullnose Outcorner SN-4269 - 2" x 2"
 Surface Bullnose Outcorner   SN-4309 3 x 3 Surface Bullnose Outcorner SN-4309 - 3" x 3"

NOTES:

  • Floor Bullnose trim is intended to coordinate with floor field tile in the standard 90-degree installation position.