COLORBODY™ PORCELAIN

volcano rock™

Exterior Product Truedge™ Certified Porcelain

Field Tile

SAND VR95
Field Tile
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Manufacturing Plant: Imported, > 500 mi.
CHOCOLATE VR96
Field Tile
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Manufacturing Plant: Imported, > 500 mi.
GRAY VR97
Field Tile
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Manufacturing Plant: Imported, > 500 mi.
GRAPHITE BLACK VR98
Field Tile
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Manufacturing Plant: Imported, > 500 mi.
 

Description

NOTES:

  • Special care should be taken when grouting with dark pigmented colors. A grout release is recommended to prevent finely powdered pigments from lodging in the pores of the tile surface.
  • Special Installation Requirement: For proper bonding, medium bed mortar should be utilized in installing tiles with a dimensional length size greater than 20" x 20", large rectangles or tiles with greater dimensional thickness than normal. Back buttering tiles of this nature in the installation process will also assure proper coverage for bonding.
  • Since there is shade variation in all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.

Product Information

TILE THICKNESS: 3/8"
RECOMMENDED GROUT JOINT: 1/8" (3/16" when rectangular sizes are used in a staggered brick-joint pattern where overlap does not exceed 33%).
  RELATIVE PRICING: Medium
  SHADE VARIATION: High (V3) High (V3)

Performance Characteristics

  D.C.O.F. C.O.F. Moisture Breaking   Chemical Abrasion
Wet Wet Dry Absorption Strength MOH's Resistance Resistance
  < 0.42 > 0.60 > 0.70 < 0.5%  > 400 lbs. 8.0 Resistant N/A

Applications

INTERIOR   EXTERIOR
  RES LT COM COM   RES COM
Floors/Patios (Covered & Uncovered)  
Walls/Backsplashes  
Countertops  
Pool Linings  
Pool Decking  

NOTES:

  • Suitable for exterior applications in freezing and non-freezing climates when proper installation methods are followed.
  • Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection.

Downloads

Tile Size

 Size     Shape
 12 x 12 Field Tile
(11 13/16" x 11 13/16")
(30 cm x 30 cm)
Pieces: 11
SQFT: 10.65  
  12" x 12" Field Tile
 12 x 24 Field Tile
(11 13/16" x 23 5/8")
(30 cm x 60 cm)
Pieces: 5
SQFT: 9.68  
  12" x 24" Field Tile

Trim

 Description   Shape Number Size Shape
 Bullnose   S-43C9 3 x 12 Bullnose S-43C9 - 3" x 12"

NOTES:

  • Floor Bullnose trim is intended to coordinate with floor field tile in the standard 90-degree installation position.