GLAZED PORCELAIN

Bordeaux™

Microban® Reveal Imaging™ Made in the USA Pre-Consumer Recycled Materials Post-Consumer Recycled Materials Certified Porcelain

Porcelain Floor Field Tile

Made in the USA CRÉME BD01
Porcelain Floor Field Tile
Pre-Consumer: 47.3%
Post-Consumer: 0.0%
Manufacturing Plant: Muskogee, OK
Made in the USA CHAMEAU BD02
Porcelain Floor Field Tile
Pre-Consumer: 47.3%
Post-Consumer: 0.0%
Manufacturing Plant: Muskogee, OK
Made in the USA MARRON BD03
Porcelain Floor Field Tile
Pre-Consumer: 47.3%
Post-Consumer: 0.0%
Manufacturing Plant: Muskogee, OK

Ceramic Wall Tile

Made in the USA CRÉME BD01
Ceramic Wall Tile
Pre-Consumer: 47.3%
Post-Consumer: 0.0%
Manufacturing Plant: Muskogee, OK
Made in the USA CHAMEAU BD02
Ceramic Wall Tile
Pre-Consumer: 47.3%
Post-Consumer: 0.0%
Manufacturing Plant: Muskogee, OK
Made in the USA MARRON BD03
Ceramic Wall Tile
Pre-Consumer: 47.3%
Post-Consumer: 0.0%
Manufacturing Plant: Muskogee, OK

Porcelain Mosaic Tile

CRÉME 3 X 3 MOSAIC BD01
Porcelain Mosaic Tile
Pre-Consumer: 14.1%
Post-Consumer: 17.3%
Manufacturing Plant: Monterrey, MX
CHAMEAU 3 X 3 MOSAIC BD02
Porcelain Mosaic Tile
Pre-Consumer: 14.1%
Post-Consumer: 17.3%
Manufacturing Plant: Monterrey, MX
MARRON 3 X 3 MOSAIC BD03
Porcelain Mosaic Tile
Pre-Consumer: 14.1%
Post-Consumer: 17.3%
Manufacturing Plant: Monterrey, MX

Decorative Tile

UNIVERSAL 3 X 13 FLOOR ACCENT BD99
Decorative Tile
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Origin: Italy
UNIVERSAL 2 X 10 WALL ACCENT BD99
Decorative Tile
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Origin: Italy
 

Description

Distinctive detailing offered in a variety of sizes make this modular floor field tile the product of choice for design versatility. Add a coordinating glazed ceramic wall tile and Universal floor or wall accent for a timeless floor and wall duo.
 
 
Introducing Bordeaux™ manufactured with Reveal Imaging™. Bordeaux's Reveal Imaging™ creates a look that's virtually indistinguishable from natural stone, with the durability and ease of cleaning found in porcelain tile and glazed ceramic tile.
 

NOTES:

  • Special Installation Requirement: For proper bonding, medium bed mortar should be utilized in installing tiles with a dimensional length size greater than 20" x 20", large rectangles or tiles with greater dimensional thickness than normal. Back buttering tiles of this nature in the installation process will also assure proper coverage for bonding.
  • Use of a latex modified thin-set is recommended for proper installation.
  • Since there is shade variation in all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.
  • Strong random shading is a result of the natural beauty of this product. To achieve the maximum intended results, tile should be pulled from multiple cartons and placement decided upon prior to installation.
  • All or select items within this series are Made in the USA, please visit http://americanolean.com/costarei for more information.

Product Information

TILE THICKNESS: 5/16"floor/wall; 1/4" mosaics
MINIMUM GROUT JOINT RECOMMENDATION: 3/16" floor; 1/16" wall; 1/8" mosaics
  RELATIVE PRICING: Medium
  SHADE VARIATION: Random (V4) Random (V4)

Performance Characteristics

  D.C.O.F. Moisture Breaking   Chemical Abrasion
Wet Absorption Strength MOH's Resistance Resistance
Floor & Mosaic Tile  > 0.42 <3.0%  >275 lbs. 8.0 Resistant 4
 Wall Tile  < 0.42 <20.0%  120-230 lbs. 4.0-6.5 Resistant N/A

Dynamic C.O.F. (Wet) value as measured by the DCOF AcuTestTM helps to assess a products suitability for a commercial environment. Read information on D.C.O.F.

Manufacturers Warning:

  • These tiles have a dynamic coefficient of friction less than 0.42 as measured by the DCOF AcutestTM method. Tiles with DCOF Acutest values less than .42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/section6.2.2.1.10.html.
  • Water, oil, grease, etc. create slippery conditions. Floor applicatons with exposure to these conditions require extra caution in product selection. Not for use on ramps.
  • For addtional information, refer to Factors to Consider.
  • Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.

Applications

WALL TILE'' INTERIOR   EXTERIOR
  RES LT COM COM   RES COM
Floors/Patios (Covered & Uncovered)  
Walls/Backsplashes  
Countertops  
Pool Linings  
Pool Decking  
FLOOR & MOSAIC TILE INTERIOR   EXTERIOR
  RES LT COM COM   RES COM
Floors/Patios (Covered & Uncovered)  
Walls/Backsplashes  
Countertops  
Pool Linings  
Pool Decking  

NOTES:

  • Floor tile and mosaic tile are suitable for exterior applications in freezing and non-freezing climates when proper installation methods are followed.
  • Wall tile is suitable for exterior applications in non-freezing climates when proper installation methods are followed.
  • Not for use on ramps.
  • Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection.

Downloads

Tile Size

 Size     Shape
 20 x 20 Field Tile
(19 3/4" x 19 3/4")
(50.2 cm x 50.2 cm)
Pieces per carton: 6
SQFT: 16.27  
Made in the USA   20" x 20" Field Tile
 13 x 20 Field Tile
(13 1/8" x 19 3/4")
(33.3 cm x 50.2 cm)
Pieces per carton: 7
SQFT: 12.86  
Made in the USA   13" x 20" Field Tile
 13 x 13 Field Tile
(13 1/8" x 13 1/8")
(33.3 cm x 33.3 cm)
Pieces per carton: 14
SQFT: 16.72  
Made in the USA   13" x 13" Field Tile
 6 1/2 x 6 1/2 Field Tile
(6 1/2" x 6 1/2")
(16.4 cm x 16.4 cm)
Pieces per carton: 54
SQFT: 15.63  
Made in the USA   6 1/2" x 6 1/2" Field Tile
 3 x 3 Mosaic
(11 15/16" x 23 15/16")
(30.2 cm x 60.9 cm)
Pieces per carton: 12
SQFT: 24  
  3" x 3" Mosaic
 10 x 14 Wall Tile
(9 27/32" x 13 31/32")
(25.0 cm x 35.5 cm)
Pieces per carton: 15
SQFT: 14.58  
  10" x 14" Wall Tile
 4 x 8 Wall Tile
(4 1/4" x 8 1/2")
(10.79 cm x 21.75 cm)
Pieces per carton: 42
SQFT: 10.63  
  4" x 8" Wall Tile
 3 x 13 Universal Floor Accent
(3" x 13 1/8")
(7.6 cm x 33.3 cm)
Pieces per carton: 8  
  3" x 13" Universal Floor Accent
 2 x 10 Wall Accent
(2" x 9 27/32")
(5.06 cm x 25.0 cm)
Pieces per carton: 20  
  2" x 10" Wall Accent

Trim

 Description   Shape Number Size Shape
 Surface Bullnose   S-4489 4 x 8 Surface Bullnose S-4489 - 4" x 8"
 Surface Bullnose   S-4849 4 1/4 x 8 1/2 Surface Bullnose S-4849 - 4 1/4" x 8 1/2"
 Surface Bullnose   S-4310 3 x 10 Surface Bullnose S-4310 - 3" x 10"
 Bullnose Outcorner   SCR/L-4489 4 x 8 Bullnose Outcorner SCR/L-4489 - 4" x 8"
 Surface Bullnose Outcorner   SN-4310 3 x 3 Surface Bullnose Outcorner SN-4310 - 3" x 3"
 Bullnose Made in the USA   P-43E9 3 x 13 Bullnose P-43E9 - 3" x 13"
 Bullnose   S-4339 3 x 3 Bullnose S-4339 - 3" x 3"

NOTES:

  • Floor Bullnose trim is intended to coordinate with floor field tile in the standard 90-degree installation position.