GLAZED PORCELAIN

Avante™

Reveal Imaging™ Made in the USA Pre-Consumer Recycled Materials Post-Consumer Recycled Materials Certified Porcelain

Porcelain Floor Tile

Made in the USA BIANCO AV96
Porcelain Floor Tile
Pre-Consumer: 47.3%
Post-Consumer: 0.0%
Manufacturing Plant: Muskogee, OK
Made in the USA CESTINO AV97
Porcelain Floor Tile
Pre-Consumer: 47.3%
Post-Consumer: 0.0%
Manufacturing Plant: Muskogee, OK
Made in the USA NEBBIA AV98
Porcelain Floor Tile
Pre-Consumer: 47.3%
Post-Consumer: 0.0%
Manufacturing Plant: Muskogee, OK
Made in the USA ORO TERRA AV99
Porcelain Floor Tile
Pre-Consumer: 47.3%
Post-Consumer: 0.0%
Manufacturing Plant: Muskogee, OK

Glazed Ceramic Mosaic Tile

BIANCO 2 X 4 MOSAIC AV96
Glazed Ceramic Mosaic Tile
Pre-Consumer: 14.1%
Post-Consumer: 17.3%
Manufacturing Plant: Monterrey, MX
CESTINO 2 X 4 MOSAIC AV97
Glazed Ceramic Mosaic Tile
Pre-Consumer: 14.1%
Post-Consumer: 17.3%
Manufacturing Plant: Monterrey, MX
NEBBIA 2 X 4 MOSAIC AV98
Glazed Ceramic Mosaic Tile
Pre-Consumer: 14.1%
Post-Consumer: 17.3%
Manufacturing Plant: Monterrey, MX
ORO TERRA 2 X 4 MOSAIC AV99
Glazed Ceramic Mosaic Tile
Pre-Consumer: 14.1%
Post-Consumer: 17.3%
Manufacturing Plant: Monterrey, MX

Glazed Ceramic Wall Tile

BIANCO 10 X 14 WALL TILE AV96
Glazed Ceramic Wall Tile
Pre-Consumer: 19.9%
Post-Consumer: 17.6%
Manufacturing Plant: Monterrey, MX
CESTINO 10 X 14 WALL TILE AV97
Glazed Ceramic Wall Tile
Pre-Consumer: 19.9%
Post-Consumer: 17.6%
Manufacturing Plant: Monterrey, MX
NEBBIA 10 X 14 WALL TILE AV98
Glazed Ceramic Wall Tile
Pre-Consumer: 19.9%
Post-Consumer: 17.6%
Manufacturing Plant: Monterrey, MX
ORO TERRA 10 X 14 WALL TILE AV99
Glazed Ceramic Wall Tile
Pre-Consumer: 19.9%
Post-Consumer: 17.6%
Manufacturing Plant: Monterrey, MX
 

Description

Subtle tones from nature inspired this series of warm neutrals. The modular line features Reveal Imaging™ on wall, floor, trim and mosaics. The wall and mosaic tile contain both pre- and post-consumer recycled materials which make this product a favorite for commercial installations.
 
 
Introducing Avante™ manufactured with Reveal Imaging™. Avante's Reveal Imaging™ creates a look that's virtually indistinguishable from natural stone, with the durability and ease of cleaning found in porcelain tile.
 

Product Information

TILE THICKNESS: 5/16" floor, 5/16" mosaics
MINIMUM GROUT JOINT RECOMMENDATION: 3/16" Floor, 1/16" Wall, 1/8" Mosaic (3/16” when rectangular sizes are used in a staggered brick-joint pattern where overlap does not exceed 33%)
  RELATIVE PRICING: Medium
  SHADE VARIATION: Random (V4) Random (V4)

Performance Characteristics

  D.C.O.F. Moisture Breaking   Chemical Abrasion
Wet Absorption Strength MOH's Resistance Resistance
Floor  > 0.42 <0.5%  >275 lbs. 8.0 Resistant 4
 Mosaic  > 0.42 <3.0%  >250 lbs. 8.0 Resistant 4
 Wall  < 0.42 <20.0%  120 - 230 lbs. 4.0 - 6.5 Resistant --NA--

Dynamic C.O.F. (Wet) value as measured by the DCOF AcuTestTM helps to assess a products suitability for a commercial environment. Read information on D.C.O.F.

Manufacturers Warning:

  • These tiles have a dynamic coefficient of friction less than 0.42 as measured by the DCOF AcutestTM method. Tiles with DCOF Acutest values less than .42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/section6.2.2.1.10.html.
  • Water, oil, grease, etc. create slippery conditions. Floor applicatons with exposure to these conditions require extra caution in product selection. Not for use on ramps.
  • For addtional information, refer to Factors to Consider.
  • Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.

Applications

INTERIOR   EXTERIOR
  RES LT COM COM   RES COM
Floors/Patios (Covered & Uncovered)  
Walls/Backsplashes  
Countertops  
Pool Linings  
Pool Decking  

NOTES:

  • Wall tile suitable for residential bathroom floors not subject to outside foot traffic.
  • Floor field is suitable for exterior applications in freezing and non-freezing climates when proper installation methods are followed.
  • Wall field is suitable for exterior applications in non-freezing climates when proper installation methods are followed.
  • Mosaic field tile is suitable for exterior applications in non-freezing climates when proper installation methods are followed.
  • Special Installation Requirement: For proper bonding, medium bed mortar should be utilized in installing tiles with a dimensional length size greater than 20" x 20", large rectangles or tiles with greater dimensional thickness than normal. Back buttering tiles of this nature in the installation process will also assure proper coverage for bonding.
  • Use of a latex modified thin-set is recommended for installation.
  • Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection.

Downloads

Tile Size

 Size     Shape
 20 x 20
(19-3/4" x 19-3/4")
(50.2 cm x 50.2 cm)
Pieces per carton: 6
SQFT: 16.27  
Made in the USA   20" x 20"
 13 x 20
(13-1/8" x 19-3/4")
(33.3 cm x 50.2 cm)
Pieces per carton: 7
SQFT: 12.86  
Made in the USA   13" x 20"
 13 x 13
(13-1/8" x 13-1/8")
(33.3 cm x 33.3 cm)
Pieces per carton: 14
SQFT: 16.72  
Made in the USA   13" x 13"
 10 x 14
(9-27/32" x 13-31/32")
(25.0 cm x 35.5 cm)
Pieces per carton: 15
SQFT: 14.58
Ceramic body  
  10" x 14"
 3 x 6
(3" x 6")
(7.6cm x 15.2cm)
Pieces per carton: 100
SQFT: 12.5
Ceramic body
(Available June 2013)  
  3" x 6"
 2 x 4
(11-7/8" x 11-7/8")
(30.2 cm x 30.2 cm)
Pieces per carton: 12
SQFT: 10
Dot-Mounted on 12 x 12 sheet
Ceramic body  
  2" x 4"

Trim

 Description   Shape Number Size Shape
 Cove Base   S-36E9T 6 x 13 Cove Base S-36E9T - 6" x 13"
 Bullnose Made in the USA   P-43E9 3 x 13 Bullnose P-43E9 - 3" x 13"
 Surface Bullnose   S-4310 3 x 10 Surface Bullnose S-4310 - 3" x 10"
 Surface Bullnose   S-4369 3 x 6 Surface Bullnose S-4369 - 3" x 6"
 Surface Bullnose   S-4639 3 x 6 Surface Bullnose S-4639 - 3" x 6"
 Surface Bullnose Corner   SCR/L-4369 3 x 6 Surface Bullnose Corner SCR/L-4369 - 3" x 6"
 Surface Bullnose Outcorner   SN-4310 3 x 3 Surface Bullnose Outcorner SN-4310 - 3" x 3"
 Cove Base Outcorner   SC-36E9TB 1 x 6 Cove Base Outcorner SC-36E9TB - 1" x 6"

NOTES:

  • Available June 2013:
    Surface Bullnose S-4369 3 x 6 (on 6" side)
    Surface Bullnose S-4369 3 x 6 (on 3" side)
    Surface Bullnose Corner SCR/L-4369 3 x 6
  • Cove Base and Floor Bullnose trim is intended to coordinate with floor field tile in the standard 90-degree installation position.