GLAZED PORCELAIN

Castlegate™

Exterior Product Made in the USA Pre-Consumer Recycled Materials Post-Consumer Recycled Materials Certified Porcelain

Porcelain Floor Tile

Made in the USA BEIGE CG15
Porcelain Floor Tile
Pre-Consumer: 47.3%
Post-Consumer: 0.0%
Manufacturing Plant: Muskogee, OK
Made in the USA GRAY CG16
Porcelain Floor Tile
Pre-Consumer: 47.3%
Post-Consumer: 0.0%
Manufacturing Plant: Muskogee, OK
Made in the USA BROWN CG17
Porcelain Floor Tile
Pre-Consumer: 47.3%
Post-Consumer: 0.0%
Manufacturing Plant: Muskogee, OK

Ceramic Wall Tile

Made in the USA BEIGE CG15
Ceramic Wall Tile
Pre-Consumer: 47.3%
Post-Consumer: 0.0%
Manufacturing Plant: Muskogee, OK
Made in the USA GRAY CG16
Ceramic Wall Tile
Pre-Consumer: 47.3%
Post-Consumer: 0.0%
Manufacturing Plant: Muskogee, OK
Made in the USA BROWN CG17
Ceramic Wall Tile
Pre-Consumer: 47.3%
Post-Consumer: 0.0%
Manufacturing Plant: Muskogee, OK

Ceramic Mosaic Tile

UNIVERSAL CG18
Ceramic Mosaic Tile
Pre-Consumer: 14.1%
Post-Consumer: 17.3%
Manufacturing Plant: Monterrey, MX
 

Description

Inspired by natural stone, Castlegate provides a rustic visual in three warm colors. The porcelain floor tile offered with a coordinating ceramic wall and mosaic tile work beautifully together in both residential and light commercial installations.
 

Product Information

TILE THICKNESS: 5/16" Floor and Wall; 1/4" Mosaic
MINIMUM GROUT JOINT RECOMMENDATION: 3/16" floor; 1/16" wall; 1/8" mosaics
  RELATIVE PRICING: Low
  SHADE VARIATION: High (V3) High (V3)

Performance Characteristics

  D.C.O.F. Moisture Breaking   Chemical Abrasion
Wet Absorption Strength MOH's Resistance Resistance
Floor  > 0.42 <0.5%  >275 lbs. 8.0 Resistant 4
 Wall  < 0.42 <20.0%  120-230 lbs. 4.0-6.5 Resistant --NA--
 Mosaic  > 0.42 <3.0%  >275 lbs. 8.0 Resistant 4

Dynamic C.O.F. (Wet) value as measured by the DCOF AcuTestTM helps to assess a products suitability for a commercial environment. Read information on D.C.O.F.

Manufacturers Warning:

  • These tiles have a dynamic coefficient of friction less than 0.42 as measured by the DCOF AcutestTM method. Tiles with DCOF Acutest values less than .42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/section6.2.2.1.10.html.
  • Water, oil, grease, etc. create slippery conditions. Floor applicatons with exposure to these conditions require extra caution in product selection. Not for use on ramps.
  • For addtional information, refer to Factors to Consider.
  • Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.

Applications

FLOOR & MOSAIC APPLICATIONS INTERIOR   EXTERIOR
  RES LT COM COM   RES COM
Floors/Patios (Covered & Uncovered)  
Walls/Backsplashes  
Countertops  
Pool Linings  
Pool Decking  
WALL APPLICATIONS INTERIOR   EXTERIOR
  RES LT COM COM   RES COM
Floors/Patios (Covered & Uncovered)  
Walls/Backsplashes  
Countertops  
Pool Linings  
Pool Decking  

NOTES:

  • Floor tile is suitable for residential exterior floor applications in freezing and non-freezing climates when proper installation methods are followed.
  • Wall and mosaic tile are suitable for exterior walls in non-freezing climates only when proper installation methods are followed.
  • Wall tile not recommended for floor applications.
  • Use of a latex modified thin-set is recommended for proper installation.
  • Not for use on ramps.
  • Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection.

Downloads

Tile Size

 Size     Shape
 18 x 18
(17 3/4" x 17 3/4")
(45.2 cm x 45.2 cm)
Pieces per carton: 8
SQFT: 18  
Made in the USA   18" x 18"
 12 x 12
(11 13/16" x 11 13/16")
(30 cm x 30 cm)
Pieces per carton: 15
SQFT: 15  
Made in the USA   12" x 12"
 2 x 2
(11 7/8" x 23 7/8")
(60.96 cm x 30.48 cm)
Pieces per carton: 12
SQFT: 24
Dot-mounted on 12" x 24" sheet  
  2" x 2"
 9 x 12
(8 15/16" x 11 15/16")
(22.7 cm x 30.3 cm)
Pieces per carton: 15
SQFT: 11.25
Wall Tile  
  9" x 12"

Trim

 Description   Shape Number Size Shape
 Bullnose   P-43C9 3 x 12 Bullnose P-43C9 - 3" x 12"
 Surface Bullnose   S-4309 3 x 9 Surface Bullnose S-4309 - 3" x 9"
 Surface Bullnose Outcorner   SN-4309 3 x 3 Surface Bullnose Outcorner SN-4309 - 3" x 3"
 Mosaic Bullnose   S-886 2 x 2 Mosaic Bullnose S-886 - 2" x 2"

NOTES:

  • Floor Bullnose trim is intended to coordinate with floor field tile in the standard 90-degree installation position.