COLORBODY™ PORCELAIN

Entity™

Exterior Product Truedge™ Pre-Consumer Recycled Materials Certified Porcelain

Field Tile

SEPIA ELEMENT EN90
Field Tile
Pre-Consumer: 8.0%
Post-Consumer: 0.0%
Origin:
BROWN MATERIAL EN91
Field Tile
Pre-Consumer: 8.0%
Post-Consumer: 0.0%
Origin:
ASH PARTICLE EN92
Field Tile
Pre-Consumer: 8.0%
Post-Consumer: 0.0%
Origin:
GRAY UNIT EN93
Field Tile
Pre-Consumer: 8.0%
Post-Consumer: 0.0%
Origin:
BLACK MATTER EN94
Field Tile
Pre-Consumer: 8.0%
Post-Consumer: 0.0%
Origin:

Accent Tiles

SEPIA ELEMENT MODERN LINER EN90
Accent Tiles
Pre-Consumer: 8.0%
Post-Consumer: 0.0%
Origin:
BROWN MATERIAL MODERN LINER EN91
Accent Tiles
Pre-Consumer: 8.0%
Post-Consumer: 0.0%
Origin:
ASH PARTICLE MODERN LINER EN92
Accent Tiles
Pre-Consumer: 8.0%
Post-Consumer: 0.0%
Origin:
GRAY UNIT MODERN LINER EN93
Accent Tiles
Pre-Consumer: 8.0%
Post-Consumer: 0.0%
Origin:
BLACK MATTER MODERN LINER EN94
Accent Tiles
Pre-Consumer: 8.0%
Post-Consumer: 0.0%
Origin:
 

Description

Reminiscent of ancient building stones, Entity is available in both an unpolished and light polished surface. An application of hematite adds a crystalline, shimmering effect to this modular, TruEdge™ rectified tile. An interlocking decorative accent is offered, which combines linear cuts in both finishes. Entity provides beauty and value, making it an excellent choice for large projects.
 

Product Information

TILE THICKNESS: 3/8"
MINIMUM GROUT JOINT RECOMMENDATION: 1/8" (3/16" when rectangular sizes are used in a staggered brick-joint pattern where overlap does not exceed 33% and when multiple sizes are used in a modular pattern.)
  RELATIVE PRICING: High
  SHADE VARIATION: Medium (V2) Medium (V2)

Performance Characteristics

  D.C.O.F. Moisture Breaking   Chemical Abrasion
Wet Absorption Strength MOH's Resistance Resistance
Unpolished  > 0.42 < 0.5%  > 450 lbs. 8.0 Resistant --NA--
 Light Polished  < 0.42 < 0.5%  > 450 lbs. 8.0 Resistant --NA--

Dynamic C.O.F. (Wet) value as measured by the DCOF AcuTestTM helps to assess a products suitability for a commercial environment. Read information on D.C.O.F.

Manufacturers Warning:

  • These tiles have a dynamic coefficient of friction less than 0.42 as measured by the DCOF AcutestTM method. Tiles with DCOF Acutest values less than .42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/section6.2.2.1.10.html.
  • Water, oil, grease, etc. create slippery conditions. Floor applicatons with exposure to these conditions require extra caution in product selection. Not for use on ramps.
  • For addtional information, refer to Factors to Consider.
  • Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.

Applications

INTERIOR   EXTERIOR
  RES LT COM COM   RES COM
Floors/Patios (Covered & Uncovered)  
Walls/Backsplashes  
Countertops  
Pool Linings  
Pool Decking  

NOTES:

  • Unpolished field tile only suitable for interior commercial and exterior residential floor/patio applications
  • Unpolished field tile suitable for exterior wall applications in freezing and non-freezing climates when proper installation methods are followed.
  • Special Installation Requirement: For proper bonding, medium bed mortar should be utilized in installing tiles with a dimensional length size greater than 20” x 20”, large rectangles or tiles with greater dimensional thickness than normal. Back buttering tiles of this nature in the installation process will also assure proper coverage for bonding.
  • Special care should be taken when grouting with dark pigmented colors. A grout release is recommended to prevent finely powdered pigments from lodging in the pores of the tile surface.
  • Use of a latex modified thin-set is recommended for proper installation.
  • Not for use on ramps.
  • Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection.

Downloads

Tile Size

 Size     Shape
 24 x 24
(23-5/8" x 23-5/8")
(60 cm x 60 cm)
Pieces per carton: 4
SQFT: 16  
  24" x 24"
 12 x 24
(11-3/4" x 23-5/8")
(29.8 cm x 60 cm)
Pieces per carton: 8
SQFT: 16  
  12" x 24"
 12 x 12
(11-3/4" x 11-3/4")
(29.8 cm x 29.8 cm)
Pieces per carton: 11
SQFT: 11  
  12" x 12"
 6 x 24
(5-13/16" x 23-5/8")
(14.8 cm x 60 cm)
Pieces per carton: 11
SQFT: 11  
  6" x 24"
 12 x 12
(11-3/4" x 11-3/4")
(29.8 cm x 29.8 cm)
Pieces per carton: 11
SQFT: 11
Modern Liner  
  12" x 12"

Trim

 Description   Shape Number Size Shape
 Bullnose   S-43C9 3 x 12 Bullnose S-43C9 - 3" x 12"
 Cove Base   P-36C9T 6 x 12 Cove Base P-36C9T - 6" x 12"
 Cove Base Outcorner   PC-36C9T 1 x 6 Cove Base Outcorner PC-36C9T - 1" x 6"

NOTES:

  • All trim items are unpolished.
  • Cove Base and Floor Bullnose trim is intended to coordinate with floor field tile in the standard 90-degree installation position.