GLAZED PORCELAIN

Bevalo™

Exterior Product Reveal Imaging™ Pre-Consumer Recycled Materials Post-Consumer Recycled Materials Certified Porcelain

Glazed Porcelain Floor Tile

DOVE BV95
Glazed Porcelain Floor Tile
Pre-Consumer: 14.4%
Post-Consumer: 17.6%
Manufacturing Plant: Monterrey, MX
MIST BV96
Glazed Porcelain Floor Tile
Pre-Consumer: 14.4%
Post-Consumer: 17.6%
Manufacturing Plant: Monterrey, MX
CHARCOAL BV97
Glazed Porcelain Floor Tile
Pre-Consumer: 14.4%
Post-Consumer: 17.6%
Manufacturing Plant: Monterrey, MX
EARTH BV98
Glazed Porcelain Floor Tile
Pre-Consumer: 14.4%
Post-Consumer: 17.6%
Manufacturing Plant: Monterrey, MX

Glazed Ceramic Mosaic Tile

DOVE BV95
Glazed Ceramic Mosaic Tile
Pre-Consumer: 14.1%
Post-Consumer: 17.3%
Manufacturing Plant: Monterrey, MX
MIST BV96
Glazed Ceramic Mosaic Tile
Pre-Consumer: 14.1%
Post-Consumer: 17.3%
Manufacturing Plant: Monterrey, MX
CHARCOAL BV97
Glazed Ceramic Mosaic Tile
Pre-Consumer: 14.1%
Post-Consumer: 17.3%
Manufacturing Plant: Monterrey, MX
EARTH BV98
Glazed Ceramic Mosaic Tile
Pre-Consumer: 14.1%
Post-Consumer: 17.3%
Manufacturing Plant: Monterrey, MX

Glazed Ceramic Wall Tile

DOVE BV95
Glazed Ceramic Wall Tile
Pre-Consumer: 32.5%
Post-Consumer: 1.5%
Manufacturing Plant: Monterrey, MX
MIST BV96
Glazed Ceramic Wall Tile
Pre-Consumer: 32.5%
Post-Consumer: 1.5%
Manufacturing Plant: Monterrey, MX
CHARCOAL BV97
Glazed Ceramic Wall Tile
Pre-Consumer: 32.5%
Post-Consumer: 1.5%
Manufacturing Plant: Monterrey, MX
EARTH BV98
Glazed Ceramic Wall Tile
Pre-Consumer: 32.5%
Post-Consumer: 1.5%
Manufacturing Plant: Monterrey, MX
 

Description

With an upscale, upbeat look and feel, Bevalo is poised to make a great first impression, while its functionality and durability will ensure long-term appeal. Its crisp, clean graphics and contemporary color palette are sure to be trendsetters, and the superior coordination between floor and wall combinations add to its dynamic beauty.
 
 
Introducing Bevalo™ manufactured with Reveal Imaging™. Bevalo's Reveal Imaging™ creates a look that's virtually indistinguishable from natural stone, with the durability and ease of cleaning found in porcelain tile.
 

Product Information

TILE THICKNESS: 5/16" Floor and Wall, 1/4" Mosaic
MINIMUM GROUT JOINT RECOMMENDATION: 3/16" Floor, 1/16" Wall, 1/8" Mosaic
  RELATIVE PRICING: Low - Medium
  SHADE VARIATION: High (V3) High (V3)

Performance Characteristics

  D.C.O.F. Moisture Breaking   Chemical Abrasion
Wet Absorption Strength MOH's Resistance Resistance
Floor  > 0.42 <0.5%  >275 lbs. 8.0 Resistant 4
 Mosaic  > 0.42 <3.0%  >250 lbs. 8.0 Resistant 4
 Wall  < 0.42 <20.0%  120-230 lbs. 4.0 - 6.5 Resistant N/A

Dynamic C.O.F. (Wet) value as measured by the DCOF AcuTestTM helps to assess a products suitability for a commercial environment. Read information on D.C.O.F.

Manufacturers Warning:

  • These tiles have a dynamic coefficient of friction less than 0.42 as measured by the DCOF AcutestTM method. Tiles with DCOF Acutest values less than .42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/section6.2.2.1.10.html.
  • Water, oil, grease, etc. create slippery conditions. Floor applicatons with exposure to these conditions require extra caution in product selection. Not for use on ramps.
  • For addtional information, refer to Factors to Consider.
  • Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.

Applications

INTERIOR   EXTERIOR
  RES LT COM COM   RES COM
Floors/Patios (Covered & Uncovered)  
Walls/Backsplashes  
Countertops  
Pool Linings  
Pool Decking  

Downloads

Tile Size

 Size     Shape
 3 x 3
(11-15/16" x 23-15/16" sheet)
(30.2 x 60.9 cm sheet)
Pieces per carton: 8
SQFT: 16
Dot-mounted on a 12" x 24" sheet  
  3" x 3"
 10 x 14
(9-27/32" x 13-31/32")
(25.0 cm x 35.5 cm)
Pieces per carton: 15
SQFT: 14.58  
  10" x 14"
 12 x 12
(11-13/16" x 11-13/16")
(30.0 cm x 30.0 cm)
Pieces per carton: 11
SQFT: 11  
  12" x 12"
 12 x 24
(11-11/16" x 23-5/8")
(29.7 cm x 60.0 cm))
Pieces per carton: 8
SQFT: 16  
  12" x 24"
 18 x 18
(17-3/4" x 17-3/4")
(45.2 cm x 45.2 cm)
Pieces per carton: 8
SQFT: 18  
  18" x 18"

Trim

 Description   Shape Number Size Shape
 Wall Bullnose   S-4310 3 x 10 Wall Bullnose S-4310 - 3" x 10"
 Wall Bullnose Corner   SN-4310 3 x 3 Wall Bullnose Corner SN-4310 - 3" x 3"
 Bullnose   P-43C9 3 x 12 Bullnose P-43C9 - 3" x 12"
 Cove Base   S-36C9T 6 x 12 Cove Base S-36C9T - 6" x 12"
 Cove Base Outcorner   SC-36C9T 6 x 1 Cove Base Outcorner SC-36C9T - 6" x 1"
 Bullnose   S-4339 3 x 3 Bullnose S-4339 - 3" x 3"

NOTES:

  • Cove Base and Floor Bullnose trim is intended to coordinate with floor field tile in the standard 90-degree installation position.