GLAZED PORCELAIN

Stone Claire™

Reveal Imaging™ Made in the USA Pre-Consumer Recycled Materials Post-Consumer Recycled Materials Certified Porcelain

Glazed Porcelain Floor Tile

Made in the USA BLUFF EL90
Glazed Porcelain Floor Tile
Pre-Consumer: 47.5%
Post-Consumer: 0.0%
Manufacturing Plant: Muskogee, OK
Made in the USA ASHEN EL91
Glazed Porcelain Floor Tile
Pre-Consumer: 47.5%
Post-Consumer: 0.0%
Manufacturing Plant: Muskogee, OK
Made in the USA RUSSET EL92
Glazed Porcelain Floor Tile
Pre-Consumer: 47.5%
Post-Consumer: 0.0%
Manufacturing Plant: Muskogee, OK

Glazed Ceramic Mosaic Tile

BLUFF EL90
Glazed Ceramic Mosaic Tile
Pre-Consumer: 14.1%
Post-Consumer: 17.3%
Manufacturing Plant: Monterrey, MX
ASHEN EL91
Glazed Ceramic Mosaic Tile
Pre-Consumer: 14.1%
Post-Consumer: 17.3%
Manufacturing Plant: Monterrey, MX
RUSSET EL92
Glazed Ceramic Mosaic Tile
Pre-Consumer: 14.1%
Post-Consumer: 17.3%
Manufacturing Plant: Monterrey, MX

Glazed Ceramic Wall Tile

BLUFF EL90
Glazed Ceramic Wall Tile
Pre-Consumer: 32.5%
Post-Consumer: 1.5%
Manufacturing Plant: Monterrey, MX
ASHEN EL91
Glazed Ceramic Wall Tile
Pre-Consumer: 32.5%
Post-Consumer: 1.5%
Manufacturing Plant: Monterrey, MX
RUSSET EL92
Glazed Ceramic Wall Tile
Pre-Consumer: 32.5%
Post-Consumer: 1.5%
Manufacturing Plant: Monterrey, MX
 

Description

Bold, dramatic, and richly sophisticated, Stone Claire is sure to catch the eye of homeowners and designers seeking to express themselves through designs as unique as they are. Mimicking natural travertine, Stone Claire is refined and modern, yet with an echo of antiquity.
 
 
Introducing Stone Claire™ manufactured with Reveal Imaging™. Stone Claire's Reveal Imaging™ creates a look that's virtually indistinguishable from natural stone, with the durability and ease of cleaning found in porcelain tile.
 

Product Information

TILE THICKNESS: 5/16" Floor and Wall, 1/4"Mosaic
MINIMUM GROUT JOINT RECOMMENDATION: 3/16" Floor, 1/16" Wall, 1/8" Mosaic (3/16" when rectangular sizes are used in a staggered brick-joint pattern where overlap does not exceed 33% and when multiple sizes are used in a modular pattern.)
  RELATIVE PRICING: Medium
  SHADE VARIATION: Random (V4) Random (V4)

Performance Characteristics

  D.C.O.F. Moisture Breaking   Chemical Abrasion
Wet Absorption Strength MOH's Resistance Resistance
Floor  > 0.42 <0.5%  >275 lbs. 8.0 Resistant 3-4
 Wall  < 0.42 <20.0%  120-230 lbs. 4.0-6.5 Resistant --NA--
 Mosaic  > 0.42 <8.0%  >250 lbs. 8.0 Resistant 3-4

Dynamic C.O.F. (Wet) value as measured by the DCOF AcuTestTM helps to assess a products suitability for a commercial environment. Read information on D.C.O.F.

Manufacturers Warning:

  • These tiles have a dynamic coefficient of friction less than 0.42 as measured by the DCOF AcutestTM method. Tiles with DCOF Acutest values less than .42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/section6.2.2.1.10.html.
  • Water, oil, grease, etc. create slippery conditions. Floor applicatons with exposure to these conditions require extra caution in product selection. Not for use on ramps.
  • For addtional information, refer to Factors to Consider.
  • Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.

Applications

' INTERIOR   EXTERIOR
  RES LT COM COM   RES COM
Floors/Patios (Covered & Uncovered) * *   *
Walls/Backsplashes  
Countertops  
Pool Linings  
Pool Decking  

Downloads

Tile Size

 Size     Shape
 3 x 3
(11-15/16" x 23-15/16" sheet)
(30.2 x 60.9 cm sheet)
Pieces per carton: 12
SQFT: 24
Dot-mounted  
  3" x 3"
 3 x 6
(3" x 6")
(7.6 cm x 15.2 cm)  
  3" x 6"
 6 1/2 x 6 1/2
(6-7/16" x 6-7/16")
(16.4 cm x 16.4 cm)
Pieces per carton: 54
SQFT: 15.63  
  6 1/2" x 6 1/2"
 10 x 14
(9-27/32" x 13-31/32")
(25.0 cm x 35.5 cm)
Pieces per carton: 15
SQFT: 14.58  
  10" x 14"
 13 x 13
(13-1/8" x 13-1/8")
(33.3 cm x 33.3 cm)
Pieces per carton: 14
SQFT: 16.72  
  13" x 13"
 13 x 20
(13-1/8" x 19-3/4")
((33.3 cm x 50.2 cm)
Pieces per carton: 7
SQFT: 12.86  
  13" x 20"
 20 x 20
(19-3/4" x 19-3/4")
(50.2 cm x 50.2 cm)
Pieces per carton: 6
SQFT: 16.27  
  20" x 20"

Trim

 Description   Shape Number Size Shape
 Bullnose   P-43E9 3 x 13 Bullnose P-43E9 - 3" x 13"
 Bullnose   S-4339 3 x 3 Bullnose S-4339 - 3" x 3"
 Surface Bullnose   S-4369 3 x 6 Surface Bullnose S-4369 - 3" x 6"
 Surface Bullnose   S4639 3 x 6 Surface Bullnose S4639 - 3" x 6"
 Surface Bullnose Outcorner   SCL4369 3 x 6 Surface Bullnose Outcorner SCL4369 - 3" x 6"
 Surface Bullnose Outcorner   SCR4369 3 x 6 Surface Bullnose Outcorner SCR4369 - 3" x 6"

NOTES:

  • Floor Bullnose trim is intended to coordinate with floor field tile in the standard 90-degree installation position.