OTHER
quarry naturals®
Field Tile
SHADOW FLASH N56 (2)Field Tile
Pre-Consumer: 0.0%
Post-Consumer: 1.5%
Post-Consumer: 1.5%
Manufacturing Plant:
Fayette, AL
SHADOW GRAY * N46 (2)Field Tile
Pre-Consumer: 0.0%
Post-Consumer: 1.5%
Post-Consumer: 1.5%
Manufacturing Plant:
Fayette, AL
PRAIRIE FLASH N04 (1)Field Tile
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Post-Consumer: 0.0%
Manufacturing Plant:
Fayette, AL
DESERT * N03 (1)Field Tile
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Post-Consumer: 0.0%
Manufacturing Plant:
Fayette, AL
FIRE FLASH N02 (1)Field Tile
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Post-Consumer: 0.0%
Manufacturing Plant:
Fayette, AL
LAVA RED * N01 (1)Field Tile
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Post-Consumer: 0.0%
Manufacturing Plant:
Fayette, AL
Description
| Quarry Naturals let you choose from a group of solid colors or slightly-striated, visually-textured "flash" surfaces, all with a natural, handcrafted look. Durable and long-wearing, Quarry Naturals' slip-resistant cushioned edge and unglazed surface make them eminently suitable for outdoor patio and pool areas as well as floors and walls. |
NOTES:
- Please specify abrasive grain when ordering.
- Abrasive grain particles added to Quarry Naturals give improved slip resistance for many types of footwear, depending on maintenance conditions.
- Use of a latex modified thin-set is recommended for installation.
- All or select items within this series are made in the USA.
- Abrasive grain available in N01,N03, and N46 in 6" x 6" and 8" x 8".
- Abrasive grain not available on most trim shapes.
- Q3565U, Q3585U, QB3565U & QCRL3565U not available in Flash colors.
- Special care should be taken when grouting with dark pigmented colors. A grout release is recommended to prevent finely powdered pigments from lodging in the pores of the surface. Use of modified latex thin-set is recommended for proper installation.
- We do not recommend light colored Quarry tile (N03, N46) in commercial kitchens unless properly sealed or with use of a grout release. It is necessary to follow the proper procedures and recommendations of grout and maintenance product manufacturers.
- (1) & (2) notations indicate price group, (1) being the least expensive.
- Quarry Tile Maintenance: - For a stain finish, clean and buff using a heavy-duty, general-purpose cleaner. For best results, use cleaner before tile is put to use, as well as for continuing maintenance. - For immediate stain protection and shine, use a high-gloss surface finish. - For a natural look with long-term stain protection, use a water-based silicone sealer.
Product Information
TILE THICKNESS: 1/2"
RECOMMENDED GROUT JOINT: 3/8"
RELATIVE PRICING:
Low - High
SHADE VARIATION: 
Medium (V2) to High (V3)
Medium (V2) to High (V3)
Performance Characteristics
| D.C.O.F. | C.O.F. | Moisture | Breaking | Chemical | Abrasion | |||
| Wet | Wet | Dry | Absorption | Strength | MOH's | Resistance | Resistance | |
 Naturals
|
> 0.42 | > 0.70 | > 0.70 | < 3.0% | > 400 lbs. | 7.0 | Resistant | --NA-- |
| Abrasive |
> 0.42 | > 0.80 | > 0.80 | < 3.0% | > 400 lbs. | 7.0 | Resistant | --NA-- |
Applications
| INTERIOR | EXTERIOR | |||||
| RES | LT COM | COM | RES | COM | ||
| Floors/Patios (Covered & Uncovered) |
|
|
|
|
|
|
| Walls/Backsplashes |
|
|
|
|
|
|
| Countertops |
|
|
|
|
|
|
| Pool Linings |
|
|
|
|
|
|
| Pool Decking |
|
|
|
|
|
|
NOTES:
- Suitable for exterior applications in freezing and non-freezing climates when proper installation methods are followed.
- Suitable for industrial installations requiring high compressive strength.
- Not for use on ramps, except when ordered with abrasive grain.
- Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection.
Downloads
Tile Size
| Size | Shape | ||
| 3 7/8 x 8 Field Tile |
(3 7/8" x 8") (9.8 cm x 20.3 cm) Pieces: 50 SQFT: 10.76 |
|
 |
| 6 x 6 Field Tile |
(6" x 6") (15.2 cm x 15.2 cm) Pieces: 44 SQFT: 11.00 |
|
 |
| 8 x 8 Field Tile |
(8" x 8") (20.3cm x 20.3 cm) Pieces: 25 SQFT: 11.11 |
|
 |
Trim
| Description | Shape Number | Size | Shape | |
| Bullnose | Q-1665U | 6 x 6 |  |
|
| Bullnose | Q-1885U | 8 x 8 |  |
|
| Cove Base Incorner | QB-3565U | 5 x 1 |  |
|
| Bullnose Corner | QCRL-1665U | 6 x 6 |  |
|
| Bullnose Corner | QCRL-1885U | 8 x 8 |  |
|
| Cove Base Outcorner | QCR-L-3565U | 5 x 6 |  |
|
| Cove Base | Q-3565U | 5 x 6 |  |
|
| Cove Base | Q-3585U | 5 x 8 |  |
|
| Transition | Q-8485U | 6 x 6 |  |
NOTES:
- Cove Base and Floor Bullnose trim is intended to coordinate with floor field tile in the standard 90-degree installation position.