OTHER

Quarry Tile

Exterior Product Made in the USA Pre-Consumer Recycled Materials

Field Tile

Made in the USA CANYON RED Q01 (1)
Field Tile
Pre-Consumer: 26.8%
Post-Consumer: 0.0%
Manufacturing Plant: Lewisport, KY
Made in the USA FAWN GRAY Q06 (2)
Field Tile
Pre-Consumer: 25.4%
Post-Consumer: 0.0%
Manufacturing Plant: Lewisport, KY
Made in the USA EMBER FLASH Q02 (2)
Field Tile
Pre-Consumer: 26.8%
Post-Consumer: 0.0%
Manufacturing Plant: Lewisport, KY
Made in the USA GRAY FLASH Q16 (2)
Field Tile
Pre-Consumer: 25.4%
Post-Consumer: 0.0%
Manufacturing Plant: Lewisport, KY
 

Description

Quarry Tile possesses warm, natural color throughout the tile, which makes it perfect throughout the homeā€¦ from floors and walls to outdoor patio and pool areas. You can choose from inviting solid colors or "flash" surfaces with slightly-striated colors and a square edge for a little added visual texture... all with a slip-resistant, unglazed surface.
 

NOTES:

  • Please specify abrasive grain when ordering.
  • Use of a latex modified thin-set is recommended for installation.
  • All or select items within this series are made in the USA.
  • Abrasive grain particles added to Quarry Tile give improved slip-resistance for many types of footwear, depending on maintenance conditions.
  • 6" x 6" size available in all Quarry colors; 3 7/8" x 8" size available in Q01 & Q02 colors only.
  • (1), (2) & (3) notations indicate price group, (1) being the least expensive.
  • Special care should be taken when grouting with dark pigmented colors. A grout release is recommended to prevent finely powdered pigments from lodging in the pores of the tile surface.
  • We do not recommend light colored Quarry tile (Q03, Q06) in commercial kitchens unless properly sealed or with use of a grout release. It is necessary to follow the proper procedures and recommendations of grout and maintenance product manufacturers.
  • Quarry Tile Maintenance:
    - For a stain finish, clean and buff using a heavy-duty, general-purpose cleaner. For best results, use cleaner before tile is put to use, as well as for continuing maintenance.
    - For immediate stain protection and shine, use a high-gloss surface finish.
    - For a natural look with long-term stain protection, use a water-based silicone sealer.

Product Information

TILE THICKNESS: 1/2"
MINIMUM GROUT JOINT RECOMMENDATION: 1/4" to 3/8"
  RELATIVE PRICING: Low - High
  SHADE VARIATION: Medium (V2) to High (V3) Medium (V2) to High (V3)

Performance Characteristics

  D.C.O.F. Moisture Breaking   Chemical Abrasion
Wet Absorption Strength MOH's Resistance Resistance
Quarry  > 0.42 <3.0%  >350 lbs 7.0 Resistant --NA--
 Abrasive Grain  > 0.42 <3.0%  >350 lbs 7.0 Resistant --NA--

A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest, click here for more information or visit the Tile Council of North America's website: www.tcnatile.com

Applications

Floor Applications
Target
DCOF wet
Suitable
Dry & Level - Interior n/a  
Wet & Level - Interior ≥ 0.42  
Exterior Applications; Pool Decking & Other Wet Areas with Minimal Footwear ≥ 0.60  
Ramps & Inclines ≥ 0.65   *
Other Applications
Suitable
Walls/Backsplashes  
Countertops  
Pool Linings  

Notes:

  • Suitable for exterior applications in freezing and non-freezing climates when proper installation methods are followed.

  • Suitable for industrial installations requiring high compressive strength.

  • * Abrasive surface only.

Downloads

Tile Size

 Size     Shape
 3 7/8 x 8 Field Tile
(3 7/8" x 8")
(9.8 cm x 20.3 cm)
Pieces per carton: 50
SQFT: 10.76  
Made in the USA   3 7/8" x 8" Field Tile
 6 x 6 Field Tile
(6" x 6")
(15.2 cm x 15.2 cm)
Pieces per carton: 44
SQFT: 11  
Made in the USA   6" x 6" Field Tile

Trim

 Description   Shape Number Size Shape
 Bullnose   Q-1665 6 x 6 Bullnose Q-1665 - 6" x 6"
 Bullnose Corner   QCRL-1665 6 x 6 Bullnose Corner QCRL-1665 - 6" x 6"
 Bullnose Corner   QCRL-1485 3 7/8 x 8 Bullnose Corner QCRL-1485 - 3 7/8" x 8"
 Cove Base Outcorner   QC-3565 5 x 1 Cove Base Outcorner QC-3565 - 5" x 1"
 Cove Base   Q-3565 5 x 6 Cove Base Q-3565 - 5" x 6"
 Cove Base Incorner   QB-3565 5 x 1 Cove Base Incorner QB-3565 - 5" x 1"
 Cove Base Long Corner   QCRL-3565 5 x 6 Cove Base Long Corner QCRL-3565 - 5" x 6"
 Bullnose   Q-1485 3 7/8 x 8 Bullnose Q-1485 - 3 7/8" x 8"

NOTES:

  • Q1665, QCRL1665, Q1485 & QCRL1485 also available in abrasive grain.
  • Q1485 & QCRL1485 available in colors Q01 and Q02 only.
  • QCRL3565 available by special order only.
  • Q3565, QCRL3565, QC3565 & QB3565 not available in Flash colors.
  • Cove Base and Floor Bullnose trim is intended to coordinate with floor field tile in the standard 90-degree installation position.