SURE STEPS II® & PAVER

Sure Step II® & Paver

Field Tile

Made in the USA RED TREAD Q30
Field Tile
Pre-Consumer: 5.0%
Post-Consumer: 0.0%
Manufacturing Plant: Lewisport, KY
Made in the USA RED PAVER Q31
Field Tile
Pre-Consumer: 5.0%
Post-Consumer: 0.0%
Manufacturing Plant: Lewisport, KY
Made in the USA FAWN GRAY TREAD Q32
Field Tile
Pre-Consumer: 5.0%
Post-Consumer: 0.0%
Manufacturing Plant: Lewisport, KY
Made in the USA FAWN GRAY PAVER Q33
Field Tile
Pre-Consumer: 5.0%
Post-Consumer: 0.0%
Manufacturing Plant: Lewisport, KY
Made in the USA SUNSET TREAD 0Q34
Field Tile
Pre-Consumer: 5.0%
Post-Consumer: 0.0%
Manufacturing Plant: Lewisport, KY
Made in the USA SUNSET PAVER 0Q35
Field Tile
Pre-Consumer: 5.0%
Post-Consumer: 0.0%
Manufacturing Plant: Lewisport, KY
Made in the USA DOVETAIL TREAD 0Q36
Field Tile
Pre-Consumer: 5.0%
Post-Consumer: 0.0%
Manufacturing Plant: Lewisport, KY
Made in the USA DOVETAIL PAVER 0Q37
Field Tile
Pre-Consumer: 5.0%
Post-Consumer: 0.0%
Manufacturing Plant: Lewisport, KY
 

Description

This is your sure choice for safety and durability. Sure Step II has superior slip resistance, even on wet or greasy floors. It's also stain-resistant, and its low moisture absorption makes maintenance easy. Sure Step's dense, color-through body has the breaking strength needed for the roughest commercial installations.
 

NOTES:

  • Trim not available in treaded surface.
  • Use of a latex modified thin-set is recommended for installation.
  • All or select items within this series are made in the USA.
  • Special care should be taken when grouting with dark pigmented colors. A grout release is recommended to prevent finely powdered pigments from lodging in the pores of the surface. Use of modified latex thin-set is recommended for proper installation.

Product Information

TILE THICKNESS: 3/8"
MINIMUM GROUT JOINT RECOMMENDATION: 3/8"
  RELATIVE PRICING: Medium
  SHADE VARIATION: Medium (V2) Medium (V2)

Performance Characteristics

  D.C.O.F. Moisture Breaking   Chemical Abrasion
Wet Absorption Strength MOH's Resistance Resistance
Tread  > 0.42 <3.0%  >400 lbs. 7.0 Resistant --NA--
 Paver  > 0.42 <3.0%  >400 lbs. 7.0 Resistant --NA--

A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest, click here for more information or visit the Tile Council of North America's website: www.tcnatile.com

Applications

INTERIOR   EXTERIOR
  RES LT COM COM   RES COM
Floors/Patios (Covered & Uncovered)  
Walls/Backsplashes  
Countertops  
Pool Linings  
Pool Decking  

NOTES:

  • Suitable for exterior applications in freezing and non-freezing climates when proper installation methods are followed.
  • Suitable for industrial installations requiring high compressive strength.
  • Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection.

Downloads

Tile Size

 Size     Shape
 6 x 6 Field Tile
(6" x 6")
(15.2 cm x 15.2 cm)
Pieces per carton: 48
SQFT: 12  
Made in the USA   6" x 6" Field Tile

Trim

 Description   Shape Number Size Shape
 Bullnose   P-1665 6 x 6 Bullnose P-1665 - 6" x 6"
 Bullnose Corner   PC-1665 6 x 6 Bullnose Corner PC-1665 - 6" x 6"
 Cove Base Long Corner   PCR-L3665 6 x 6 Cove Base Long Corner PCR-L3665 - 6" x 6"
 Cove Base Incorner   PB-3665 3/4 x 6 Cove Base Incorner PB-3665 - 3/4" x 6"
 Cove Base   P-3665 6 x 6 Cove Base P-3665 - 6" x 6"

NOTES:

  • Cove Base and Floor Bullnose trim is intended to coordinate with floor field tile in the standard 90-degree installation position.