This is your sure choice for safety and durability. Sure Step II has superior slip resistance, even on wet or greasy floors. It's also stain-resistant, and its low moisture absorption makes maintenance easy. Sure Step's dense, color-through body has the breaking strength needed for the roughest commercial installations.
Trim not available in treaded surface.
Use of a latex modified thin-set is recommended for installation.
All or select items within this series are made in the USA.
Special care should be taken when grouting with dark pigmented colors. A grout release is recommended to prevent finely powdered pigments from lodging in the pores of the surface. Use of modified latex thin-set is recommended for proper installation.
TILE THICKNESS: 3/8"
MINIMUM GROUT JOINT RECOMMENDATION: 3/8"
SHADE VARIATION: Medium (V2)
A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest, click here for more information or visit the Tile Council of North America's website: www.tcnatile.com
Floors/Patios (Covered & Uncovered)
Suitable for exterior applications in freezing and non-freezing climates when proper installation methods are followed.
Suitable for industrial installations requiring high compressive strength.
Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection.