COLORBODY™ PORCELAIN

St. Germain™

Certified Porcelain Truedge™ Linear Express™ Reveal Imaging™

Floor Tile

BLANC SE60
Floor Tile
Pre-Consumer: 22.5%
Post-Consumer: 0.0%
Origin: China
CREME SE61
Floor Tile
Pre-Consumer: 22.5%
Post-Consumer: 0.0%
Origin: China
CHENILE SE62
Floor Tile
Pre-Consumer: 22.5%
Post-Consumer: 0.0%
Origin: China
SABLE SE64
Floor Tile
Pre-Consumer: 22.5%
Post-Consumer: 0.0%
Origin:
CHOCOLAT SE65
Floor Tile
Pre-Consumer: 22.5%
Post-Consumer: 0.0%
Origin: China
GRIS SE67
Floor Tile
Pre-Consumer: 22.5%
Post-Consumer: 0.0%
Origin: China
 

Description

Emulating the superb texture of fabrics found in the St. Germain district of Paris, this tile is available in a tapestry of six welcoming colors that also possess remarkably linear undertones. This contemporary, high-fashion tile has a unique capacity to complement many room accents thanks in part to its soft, comforting effect.
 

NOTES:

  • Not for use on ramps. Water, oil, grease, improper drainage and certain footwear can create slippery conditions. Floor applications expected to be exposed to these conditions require extra caution in product selection.
  • Since there are variations in all fired ceramic products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or reproductions.
  • Special care should be taken when grouting with dark pigmented colors. A grout release is recommended to prevent finely powdered pigments from lodging in the pores of the surface. Use of modified latex thin-set is recommended for proper installation.

Product Information

TILE THICKNESS: 3/8"
MINIMUM GROUT JOINT RECOMMENDATION: 1/8” (3/16" when rectangular sizes are used in a staggered brick-joint pattern where overlap does not exceed 33%).
  RELATIVE PRICING: Medium to High
  SHADE VARIATION: Medium (V2) Medium (V2)

Performance Characteristics

  D.C.O.F. Moisture Breaking   Chemical Abrasion
Wet Absorption Strength MOH's Resistance Resistance
  > 0.42 < 0.5%  > 275 lbs. 8.0 Resistant N/A

NOTES:

A DCOF value of > 0.42 is the standard for tiles specified for level interior spaces expected to be walked upon when wet, as stated in ANSI A137.1-2012, Section 9.6. For more information about DCOF and the DCOF AcuTest™, click here or visit the Tile Council of North America's website: www.tcnatile.com.

Applications

APPLICATIONS
Target
DCOF wet
Suitable
Dry & Level - Interior Floor N/A  
Wet & Level - Interior Floor ≥ 0.42  
Shower Floors (Residential or Light Commercial) ≥ 0.42  
Exterior Floor Applications (including pool decking & other wet areas with minimal footwear) ≥ 0.60  
Ramps & Inclines ≥ 0.65  
Walls/Backsplashes N/A  
Countertops N/A  
Pool Linings N/A  

Notes:

  • Suitable for exterior applications in freezing and non-freezing climates when proper installation methods are followed.

Downloads

Tile Size

 Size     Shape
 24 x 24 Floor Tile
(23 3/8" x 23 3/8")
(59.44 cm x 59.44 cm)
Pieces per carton: 4
SQFT: 15.20  
  24" x 24" Floor Tile
 12 x 24 Floor Tile
(11 5/8" x 23 3/8")
(29.56 cm x 59.44 cm)
Pieces per carton: 8
SQFT: 15.12  
  12" x 24" Floor Tile
 12 x 12 Floor Tile
(11 5/8" x 11 5/8")
(29.56 cm x 29.56 cm)
Pieces per carton: 11
SQFT: 10.34  
  12" x 12" Floor Tile
 6 x 24 Floor Tile
(5 3/4" x 23 3/8")
(14.62 cm x 59.44 cm)
Pieces per carton: 11
SQFT: 10.34  
  6" x 24" Floor Tile

NOTES:

  • Special consideration needs to be given when installing tiles greater than 15 inches. Please click here for more information.

Trim

 Description   Shape Number Size Shape
 Floor Bullnose   S-43C9 3 x 12 Floor Bullnose S-43C9 - 3" x 12"
 Cove Base   S-36C9T 6 x 12 Cove Base S-36C9T - 6" x 12"
 Cove Base Outcorner   SC-36C9T 6 x 1 Cove Base Outcorner SC-36C9T - 6" x 1"

NOTES:

  • Cove base trim is intended to coordinate with floor tile in the standard 90-degree installation position.