GLAZED PORCELAIN

Creekwood™

Certified Porcelain Reveal Imaging™ Made in the USA Pre-Consumer Recycled Materials

Floor Tile

Made in the USA BIRCH STREAM CW96
Floor Tile
Pre-Consumer: 47.3%
Post-Consumer: 0.0%
Manufacturing Plant: Sunnyvale, TX
Made in the USA MAPLE LAKE CW97
Floor Tile
Pre-Consumer: 47.3%
Post-Consumer: 0.0%
Manufacturing Plant: Sunnyvale, TX
Made in the USA ASH RIVER CW99
Floor Tile
Pre-Consumer: 47.3%
Post-Consumer: 0.0%
Manufacturing Plant: Sunnyvale, TX
Made in the USA WALNUT BROOK CW98
Floor Tile
Pre-Consumer: 47.3%
Post-Consumer: 0.0%
Manufacturing Plant: Sunnyvale, TX
 

Description

Creekwood™ by American Olean® provides the warmth and ambiance of natural wood flooring with the durability of a porcelain tile. The 6 x 36 size allows for traditional wood-plank installations in settings that demand higher performance and functionality than wood provides. With slight undulations, linear wood grains, and realistic knots, Creekwood utilizes Reveal Imaging® to create an authentic wood look on a porcelain body.
 

NOTES:

  • Since there are variations in all fired ceramic and natural products, tile and trim supplied for your particular installation may not match samples. Final confirmation should be made from actual tiles and trim prior to installation. Manufactured in accordance with ANSI A137.1 standards.
  • Use of a latex modified thin-set is recommended for installation.

Product Information

TILE THICKNESS: 5/16"
MINIMUM GROUT JOINT RECOMMENDATION: 3/16" (Overlap should not exceed 33% when installing tile with a length 15" or greater in a staggered brick-joint pattern.)
  RELATIVE PRICING: Medium
  SHADE VARIATION: High (V3) High (V3)

Performance Characteristics

  D.C.O.F. Moisture Breaking   Chemical Abrasion
Wet Absorption Strength MOH's Resistance Resistance
  > .42 < 0.5%  > 275 lbs. 8.0 Resistant 3 (CW98)
4 (CW96, CW97, CW99)

NOTES:

A DCOF value of > 0.42 is the standard for tiles specified for level interior spaces expected to be walked upon when wet, as stated in ANSI A137.1-2012, Section 9.6. For more information about DCOF and the DCOF AcuTest™, click here or visit the Tile Council of North America's website: www.tcnatile.com.

Applications

APPLICATIONS
Target
DCOF wet
Suitable
Dry & Level - Interior Floor N/A  
Wet & Level - Interior Floor ≥ 0.42  
Shower Floors (Residential or Light Commercial ≥ 0.42  
Exterior Floor Applications (including pool decking & other wet areas with minimal footwear) ≥ 0.60  
Ramps & Inclines ≥ 0.65  
Walls/Backsplashes N/A  
Countertops N/A  
Pool Linings N/A  

Notes:

  • Suitable for exterior applications in freezing and non-freezing climates when proper installation methods are followed.

  • Not for use on ramps. Water, oil, grease, improper drainage and certain footwear can create slippery conditions. Floor applications expected to be exposed to these conditions require extra caution in product selection.

Downloads

Tile Size

 Size     Shape
 6 x 36 Floor Tile
(5 7/8" x 35 7/16")
(15.00 cm x 90.00 cm)
Pieces per carton: 9
SQFT: 13.05  
Made in the USA   6" x 36" Floor Tile

NOTES:

  • Special consideration must be given when installing tiles greater than 15 inches. Please click here for more information.

Trim

 Description   Shape Number Size Shape
 Floor Bullnose Made in the USA   S-43H9 3 x 18 Floor Bullnose S-43H9 - 3" x 18"

NOTES: