COLORBODY™ PORCELAIN

Neospeck™

Certified Porcelain Truedge™ Reveal Imaging™ Made in the USA Pre-Consumer Recycled Materials

Colorbody™ Porcelain Floor

Made in the USA WHITE NE01
Colorbody™ Porcelain Floor
Pre-Consumer: 51.1%
Post-Consumer: 0.0%
Manufacturing Plant: Dickson, TN
Made in the USA BEIGE NE02
Colorbody™ Porcelain Floor
Pre-Consumer: 51.1%
Post-Consumer: 0.0%
Manufacturing Plant: Dickson, TN
Made in the USA LIGHT GRAY NE03
Colorbody™ Porcelain Floor
Pre-Consumer: 51.1%
Post-Consumer: 0.0%
Manufacturing Plant: Dickson, TN
Made in the USA MEDIUM GRAY NE04
Colorbody™ Porcelain Floor
Pre-Consumer: 51.1%
Post-Consumer: 0.0%
Manufacturing Plant: Dickson, TN
Made in the USA DARK GRAY NE05
Colorbody™ Porcelain Floor
Pre-Consumer: 51.1%
Post-Consumer: 0.0%
Manufacturing Plant: Dickson, TN

Colorbody™ Porcelain Mosaic

WARM UNIVERSAL NE06
Colorbody™ Porcelain Mosaic
Pre-Consumer: 51.1%
Post-Consumer: 0.0%
Manufacturing Plant: Monterrey, MX
COOL UNIVERSAL NE07
Colorbody™ Porcelain Mosaic
Pre-Consumer: 51.1%
Post-Consumer: 0.0%
Manufacturing Plant: Monterrey, MX
 

Description

Neospeck offers a terrazzo-inspired aesthetic with a monochromatic color scheme perfect for commercial settings. Its retro style with a modern vibe gives designers the ability to create clean contemporary spaces using large-format sizes with rectified edges. Five colors are available in unpolished and light polished finishes. Accentuate your design with a trapezoid mosaic in two complementary blends for an intriguing geometric effect.
 

NOTES:

  • Since there are variations in all fired ceramic and natural products, tile and trim supplied for your particular installation may not match samples. Final confirmation should be made from actual tiles and trim prior to installation. Manufactured in accordance with ANSI A137.1 standards.
  • Not for use on ramps. Water, oil, grease, improper drainage and certain footwear can create slippery conditions. Floor applications expected to be exposed to these conditions require extra caution in product selection.
  • Manufacturer Advisory: All tile is measured by the DCOF AcuTest™ method. Tiles with DCOF values <0.42 are not recommended for use in areas with wet or slippery conditions. For more information, see ANSI standard A137.1 section 6.2.2.1.10, available at www.tileusa.com.
  • Special care should be taken when grouting with dark pigmented colors. A grout release is recommended to prevent finely powdered pigments from lodging in the pores of the surface. Use of a latex modified thin-set is recommended for installation.

Product Information

TILE THICKNESS: 3/8"
MINIMUM GROUT JOINT RECOMMENDATION: Floor: 1/8" (3/16" when installing tile with a length 15" or greater in a staggered brick-joint pattern; overlap should not exceed 33%.)
Mosaic: 1/8"
  RELATIVE PRICING: Medium to High
  SHADE VARIATION: Medium (V2) Medium (V2)

Performance Characteristics

  D.C.O.F. Moisture Breaking   Chemical Abrasion
Wet Absorption Strength MOH's Resistance Resistance
Unpolished  > 0.42 < 0.5%  > 275 lbs. 8.0 Resistant N/A
 Light Polished  < 0.42 < 0.5%  > 275 lbs. 8.0 Resistant N/A
 Mosaic  < 0.42 < 0.5%  > 275 lbs. 8.0 Resistant N/A

NOTES:

A DCOF value of > 0.42 is the standard for tiles specified for level interior spaces expected to be walked upon when wet, as stated in ANSI A137.1-2012, Section 9.6. For more information about DCOF and the DCOF AcuTest™, click here or visit the Tile Council of North America's website: www.tcnatile.com.

Applications

APPLICATIONS
Target
DCOF wet
Suitable
Dry & Level - Interior Floor N/A  
Wet & Level - Interior Floor ≥ 0.42   *
Shower Floors (Residential or Light Commercial) ≥ 0.42  
Exterior Floor Applications (including pool decking & other wet areas with minimal footwear) ≥ 0.60  
Ramps & Inclines ≥ 0.65  
Walls/Backsplashes N/A  
Countertops N/A  
Pool Linings N/A   ^

Notes:

  • Suitable for exterior applications in freezing and non-freezing climates, when proper installation methods are followed.

  • *Unpolished finish only

  • ^ Mosaic tile only

Downloads

Tile Size

 Size     Shape
 24 x 24 Floor Tile
(23 3/8" x 23 3/8")
(59.44 cm x 59.44 cm)
Pieces per carton: 4
SQFT: 15.20
Available in Unpolished and Light Polished  
  24" x 24" Floor Tile
 12 x 24 Floor Tile
(11 5/8" x 23 3/8")
(29.56 cm x 59.44 cm)
Pieces per carton: 8
SQFT: 15.12
Available in Unpolished and Light Polished  
  12" x 24" Floor Tile
 4 x 6 Trapezoid Mosaic
(12" x 12" Sheet)
(30.48 cm x 30.48 cm Sheet)
Pieces per carton: 10
SQFT: 10.00
Mesh-mounted
A blend of Unpolished and Light Polished finishes  
  4" x 6" Trapezoid Mosaic

NOTES:

  • Special consideration needs to be given when installing tiles greater than 15 inches. Please click here for more information.

Trim

 Description   Shape Number Size Shape
 Floor Bullnose   P-43F9 3 x 24 Floor Bullnose P-43F9 - 3" x 24"
 Cove Base   P-36C9TB 6 x 12 Cove Base P-36C9TB - 6" x 12"
 Cove Base Outcorner   PC-36C9TB 1 x 6 Cove Base Outcorner PC-36C9TB - 1" x 6"

NOTES:

  • Cove base and cove corner trim are ceramic body.
  • Cove base and cove corner trim are suitable for non-freezing climates only.
  • Cove base trim is intended to coordinate with floor tile in the standard 90-degree installation position.