GLAZED PORCELAIN

Waterwood™

Certified Porcelain Reveal Imaging™ Made in the USA Pre-Consumer Recycled Materials Post-Consumer Recycled Materials

Glazed Porcelain Floor Tile

Made in the USA WHITE OAK WD15
Glazed Porcelain Floor Tile
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Origin: United States
Made in the USA WEATHERED OAK WD18
Glazed Porcelain Floor Tile
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Origin: United States
Made in the USA NATURAL OAK WD16
Glazed Porcelain Floor Tile
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Origin: United States
Made in the USA CLASSIC OAK WD17
Glazed Porcelain Floor Tile
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Origin: United States

Glazed Ceramic Mosaic

WHITE OAK WD15
Glazed Ceramic Mosaic
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Origin: Mexico
WEATHERED OAK WD18
Glazed Ceramic Mosaic
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Origin: Mexico
NATURAL OAK WD16
Glazed Ceramic Mosaic
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Origin: Mexico
CLASSIC OAK WD17
Glazed Ceramic Mosaic
Pre-Consumer: 0.0%
Post-Consumer: 0.0%
Origin: Mexico
 

Description

Inspired by the bricola wood pillars that grace the waterways of Venice, this unique wood-look tile is not your everyday oak look. This wood is transformed by years of water exposure into a unique look found in only one place in the world. Graceful porcelain planks in 8x40 or a 1 ½ inch hexagon mosaic are perfect complements to uncommon designs.
 

NOTES:

  • Since there are variations in all fired ceramic and natural products, tile and trim supplied for your particular installation may not match samples. Final confirmation should be made from actual tiles and trim prior to installation. Manufactured in accordance with ANSI A137.1 standards.
  • Use of a latex modified thin-set is recommended for installation.

Product Information

TILE THICKNESS: 8 x 40 - 5/16"; Mosaic - 1/4"
MINIMUM GROUT JOINT RECOMMENDATION: Floor: 3/16" (Overlap should not exceed 33% when installing tile with a length 15" or greater in a staggered brick-joint pattern.) Mosaic: 1/8"
  RELATIVE PRICING: Medium
  SHADE VARIATION: High (V3) High (V3)

Performance Characteristics

  D.C.O.F. Moisture Breaking   Chemical Abrasion
Wet Absorption Strength MOH's Resistance Resistance
Floor  > 0.42 < 0.5%  > 275 lbs. 8.0 Resistant 3
 Mosaic  > 0.42 < 3.0%  > 250 lbs. 8.0 Resistant 3

NOTES:

A DCOF value of > 0.42 is the standard for tiles specified for level interior spaces expected to be walked upon when wet, as stated in ANSI A137.1-2012, Section 9.6. For more information about DCOF and the DCOF AcuTest™, click here or visit the Tile Council of North America's website: www.tcnatile.com.

Applications

APPLICATIONS
Target
DCOF wet
Suitable
Dry & Level - Interior Floor N/A  
Wet & Level - Interior Floor ≥ 0.42  
Shower Floors (Residential or Light Commercial) ≥ 0.42   *
Exterior Floor Applications (including pool decking & other wet areas with minimal footwear) ≥ 0.60  
Ramps & Inclines ≥ 0.65  
Walls/Backsplashes N/A  
Countertops N/A  
Pool Linings N/A   *

Notes:

  • Floor tile suitable for exterior applications in freezing and non-freezing climates, when proper installation methods are followed.

  • Mosaic tile suitable for exterior applications in non-freezing climates, when proper installation methods are followed.

  • *Mosaic tile only

  • Not for use on ramps. Water, oil, grease, improper drainage and certain footwear can create slippery conditions. Floor applications expected to be exposed to these conditions require extra caution in product selection.

Downloads

Tile Size

 Size     Shape
 8 x 40 Floor Tile
(7 7/8" x 39 3/8")
(20.00 cm x 100.00 cm)
Pieces per carton: 5
SQFT: 10.75  
Made in the USA   8" x 40" Floor Tile
 1 1/2 x 1 1/2 Hexagon Mosaic
(11 3/8" x 10 1/4" Sheet)
(28.89 cm x 26.04 cm)
Pieces per carton: 12
SQFT: 9.72
Dot-mounted, ceramic body  
  1 1/2" x 1 1/2" Hexagon Mosaic

NOTES:

  • Special consideration must be given when installing tiles greater than 15 inches. Please click here for more information.